Does your prototyping project require soldering? Are you looking for something other than your usual run-o'-the-mill solder wire? Look no further! This high quality, low cost, adorably packaged Lead-Free Prototyping Solder Paste from IC Breakout will provide strong, flux-aided conductive bonds for your board.

This paste is now reformulated to melt at very low temperatures - only 140 °C!

Since it’s premixed, all you need to do is screw on the self-piercing cap, squeeze the paste onto your solder pads, and heat it up using a soldering iron, oven, or any other thermal source to reach the re-flow temperature of 140 °C (284 °F). Once liquidus, remove your heat source and let it cool.

The lead free metal content is a mix of Bismuth, Tin and Silver. The mix is a eutectic solder, meaning that it’s either going to be a solid or liquid during re-flow; not something in between.


Features:

  • Lead free
  • No clean-up
  • Clear residue
  • Premixed, ready to use
  • Low temperature use

Specifications:

  • Bi57 42Sn Ag1
  • Product Dimensions: 70.0mm x 16.0mm x 10.2mm / 2.8" x 0.6" x 0.4"
  • Product Weight: 9.6g / 0.3oz


Write a review

Please login or register to review

Maker Paste - Low Temperature Lead-Free Solder Paste

  • 47.25 AED

  • Ex Tax: 45.00 AED